12/12/2018 0 Comments Stl Export For CncI am using the non pro version of Sketchup. I had hoped to use it to create files (STL format is fine) that I could take to my CadCam program to run on my small home CNC. I do have Vectric Aspire, but for some things features in Sketchup would be much more convenient. I think I see the answer to my question inferred through several other posts but want to be certain I am interpreting this correctly. Solet’s say I made a birdhouse in Sketchup. The design is fancy and has mortis and tenons for joining the various parts and Sketchup is a whiz at doing something like that. When it is done I would like to take that design and move it to Aspire to cut the parts on my CNC. The STL (Standard Triangle Language) is the industry standard file type for 3D Printing. It uses a series of triangles to represent the surfaces of a solid model. It uses a series of triangles to represent the surfaces of a solid model. An STL object must define a complete and closed surface. Use STL-Check modifier to test your geometry before exporting your object to STL. Select an object. Click Modify 5. Select “STL-Check” under Object-Space Modifiers 7. Select Check 8. If there are no errors, continue to export the STL file by: 9. Clicking File>Export 10. Nov 12, 2018 - Modern CAM software can - before sending the G-Code to the CNC. You can export the design into the needed format (STL/STEP/IGES). ![]() Cnc Stl Files![]() I do not see an easy way to take the elements of my 3D model of the birdhouse and explode them and orient them on the same plane in a way that would translate to the CNC? In other posts about CNC’s it appears the only way to do this would be to select one part and hide everything else then save it out as an STL file to take to the CNC. Repeat this for each part of the bird house. Free Stl Models For CncWith a small project like a bird house that would not be too bad. For anything with a larger number of parts it would be pretty cumbersome, to say the least. Am I reading this right or is there a more elegant way to do this? Thanks for your time folks, Dave. Somers_dw: I do not see an easy way to take the elements of my 3D model of the birdhouse and explode them and orient them on the same plane in a way that would translate to the CNC? Model one logical part of the birdhouse. Stl Format For CncStop and make that part a Group or Component. Then model the next logical part of the birdhouse. Stop and make that part a Group or Component. And so on, until the model is complete. Creating Groups and Components Typically one nests the parts to be cut with a CNC router within the dimensional confines of the stock. Perhaps make a copy of the model. Therein you can Move and Rotate the groups flat on the ground plane, arranging them as needed.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |